SMSCOM SPC 8A MK2 EU

€156.71

The SMSCOM SPC 8A MK2 is the successor of the well-known SPC 7A. The SPC MK2 is an automatic climate controller for controlling fans. The SMSCOM SPC 8 Ampere is electronically controlled and ensures the correct temperature of the room in a simple, accurate way.

- +
SMSCOM SPC 8A MK2 EU
SKU: b100200

The SMSCOM SPC 8A MK2 is the successor of the well-known SPC 7A. The SPC MK2 is an automatic climate controller for controlling fans. The SMSCOM SPC 8 Ampere is electronically controlled and ensures the correct temperature of the room in a simple, accurate way.

The SMSCOM SPC 8 Amps controls the correct speed of your fans and maintains the correct temperature. In and / or exhaust fans can be connected to any power outlet.

The renewed SPC has an extra connection which makes it easy to expand the SPC 8A MK2 with the newly introduced SPC SLAVE 16A MK2. Up to 5 SPC SLAVE 16A units can be connected to each SPC controller.

Features

  • Plug & Play thanks to the clear layout and easy operation;
  • 2 different modes Automatic or 100%;
  • Precise temperature-controlled speed control;
  • Temperature sensor with 5 meter cable;
  • Adjustable minimum speed from 20% to 60%;
  • Maximum speed adjustable from 60% to 100%;
  • Desired temperature adjustable between 10°C and 45°C;
  • Temperature bandwidth can be set between 2°C and 7°C.

User manual

  • Automatic temperature control:
    • Plug the fan(s) into one of the two sockets, it doesn't matter if you plug in an air or exhaust motor or even multiple motors as long as the total maximum amperage is not exceeded;
    • Use the leftmost dial to set the desired minimum speed, e.g. 30%;
    • Use the centre dial to set the desired maximum speed, e.g. 80%;
    • Use the right-hand dial to set the desired bandwidth, e.g. 3°C;
    • With the upper rotary knob you can now set the desired temperature, for example 25°C;
    • Plug in the SPC MK2 and set the switch to "AUTO", the SPC MK2 starts for a few seconds at 100% and then switches to the desired program.
  • Manual at full power:
    • Plug in the SPC MK2 and set the switch to "100%".

Specifications

  • Type: 00-1000-EU;
  • Capacity: Maximum 8 Ampere;
  • Voltage: 220 ~ 240 volts;
  • Frequency: 50 / 60 Hz;
  • Dynamic range: 0.5 / 8 Ampere;
  • Temperature sensor: 4K7 to 25°C;
  • Bandwidth: 1 ~ 7°C.

Attention
The SMSCOM SPC MK2 is tuned to the most common fans. However, it is possible to reset the minimum speed. To do this, turn the calibration potentiometer which is located on the left side of the fuse holder behind the cover cap left (min) or right (plus). Adjust the fan so that the fan always runs at the minimum speed. If your potentiometer is adjusted too low, you increase the chance of irregular running which can lead to humming of the fan motor.

shipping Shipping Worldwide
return Free 7-day return if eligible, so easy
supplier Supplier give bills for this product.
payment Pay online or when receiving goods