SMSCOM TEMPPROTECTOR MK2 16A EU
SMSCOM's TEMPPROTECTOR MK2 monitors the temperature of the grow room. If the temperature is too high, the lights are switched off to protect your plants. On the TEMPPROTECTOR MK2 you can set the restart delay yourself to protect your lamps against a too fast restart.
Roll over image to zoom in
SMSCOM's TEMPP PROTECTOR MK2 monitors the temperature of the grow room. If the temperature is too high, the lamps are switched off to protect your plants. On the TEMPPROTECTOR MK2 you can set the restart delay yourself to protect your lamps against a too fast restart.
Operation of the Temperature Protector MK2
The TEMPCONTROLLER MK2 is the ideal monitor for temperature control in a room. The system ensures that the temperature does not become too high in the growroom. By switching the TEMPCONTROLLER MK2 controller with temperature sensor, the protector knows to what height the temperature in the room may be. If the temperature is exceeded, the temperature controller will switch off the connected lamps so that the temperature is not exceeded.
The TEMP protector has a built-in timer (button on the right). This timer can be set between 1 and 35 minutes and determines the time that the lamps, when switched off, must remain off. This to prevent damage to the lamps.
Use of the TEMPCONTROLLER MK2
- take the TEMP protector out of the box and place it in a grounded wall outlet;
- Connect the lamps to the TEMPCONTROLLER MK2. Do not switch more than 2400 Watt on lamps! Overload leads to irreparable damage!
- Turn the thermostat to the desired temperature and the timer to the desired delay time.
When the temperature rises above the setting, the TEMP controller will switch off the power and only switch on again when the temperature has dropped below the set temperature and the set delay time has elapsed.