VENTS 125 QUIETLINE-K DUO AXIAAL VENTILATOR Ø 125 MM / 145 M³ + 197 M³
Vents axial inline fans are designed as exhaust and supply ventilation with a capacity of up to 358 m3/h. The fans are suitable for continuous or periodic extraction of bathrooms, showers and kitchens. The Vents 125 Quietline-K DUO achieves an ideal microclimate by combining a maximum air flow with a low noise level.
The axial inline fans of Vents are designed as exhaust and supply ventilation with a maximum capacity of 358 m3/h. The fans are suitable for continuous or periodic extraction of, among others, bathrooms, showers and kitchens.
The Vents 125 Quietline-K DUO achieves an ideal microclimate by combining a maximum air flow with a low noise level. This fan conveys low and average airflow volumes at low air resistance in the ventilation system.
The housing and impeller are made of high quality durable ABS plastic, UV resistant. The outlet connection is equipped with specially designed airflow rectifiers to reduce air turbulence, noise level and air pressure. Thanks to the smart design, the efficiency of the fan is high and the service life long.
The two-speed single-phase electric motor is designed for continuous use and requires no maintenance. In addition, the motor is equipped with a protection against overheating. You can control the fan via a switch in the room lighting. This switch is available separately. In addition, setting the speed is possible via a thyristor speed controller.
The fan is mounted in a matching duct size and is suitable for air ducts of Ø 125 mm. For safety reasons, always fasten the fan with clamps in case of a flexible duct connection. The mounting bracket allows the fan to be installed on both horizontal and vertical flat surfaces.
Do you want to improve performance? Then install two fans in series.
- Type: exhaust, inlet;
- Frequency: 50/60 Hz;
- Voltage: 220-240 V;
- Energy consumption: 10 - 13 W;
- Current: 0.065-0.085 A;
- RPM: 1950-2250;
- Maximum air capacity: 145-197 m3/h;
- Sound pressure level at 3m: 29-32 dB;
- Spigot size: 125 mm;
- Weight: 0.75 kg;
- Mounting: inline;
- Degree of protection: IP X4.