VENTS TT PRO 125 RV MIXED-FLOW VENTILATOR Ø 125 MM / 240 M³ + 350 M³
The Vents TT PRO 125 RV Mixed-Flow Fan is equipped with a single-phase, powerful motor with a low energy requirement that can be controlled via the built-in speed switch. This PRO fan distributes the airflow in such a way that the best combination of high performance, increased pressure and low noise level is achieved.
The VENTS TT and VENTS TT PRO fans are specifically designed for supply and exhaust ventilation of buildings that require high pressure, powerful airflow and low noise level. The fans are ideal for ventilating bathrooms, kitchens and other humid areas, as well as flats, houses, shops, cafés, etc.
The Vents TT PRO 125 RV Mixed-Flow Fan is equipped with a single-phase, powerful motor with low energy requirements and has a thermal overload protection to prevent motor overload. Thanks to the ball bearings, the service life of the motor has been extended to 40,000 hours in non-stop operation.
In addition to a very powerful motor, the PRO version has an optimized design with a housing made of low flammable polypropylene. In addition, the inlet is equipped with a collector to allow smooth air intake to the fan. The impeller in the form of a hemisphere and blades with profile increase the circular speed of the air flow and offer a higher pressure and capacity compared to standard axial fans. Finally, the diffuser, impeller and guide vanes at the outlet of the fan housing ensure that the air flow is distributed in such a way that the best combination of high performance, increased pressure and low noise level is achieved.
The built-in switch controls the fan speed (option V). It is also possible to use an external switch for this purpose and to expand the possibilities by connecting a timer with an adjustable switch-off delay. Both are available separately.
After loosening a number of clamps, the impeller and engine block are removable. This makes maintenance of the fan quick and easy. A complete disassembly is not necessary. Simply remove the central block from the housing and perform the required maintenance.
The fan can be installed at any point and in any corner of the ventilation system. Installing multiple fans within one system is no problem. Also convenient: the fan comes with cord and plug.
- Type: exhaust, inlet;
- Frequency: 50/60 Hz;
- Voltage: 230 V;
- Energy consumption: 25-29 W;
- Current: 0.11-0.13 A;
- RPM: 1630-2300;
- Maximum air capacity: 240-350 m3/h;
- Sound pressure level at 3 m: 27-32 dB;
- Spigot size: 125 mm;
- Weight: 2.15 kg;
- Mounting: inline;
- Protection class: IP X4.